Rachio Irrigation Controller: How to Turn off the Saturation Skip Feature
Here the simple steps to turning off the Saturation Skip Feature on a Rachio Irrigation Timer and why this feature can be a problem.
Read MoreHelping Tri-City Gardeners Grow Since 1940!
Job's Nursery LLC is a family owned nursery and tree farm that offers a wide selection of outdoor plants that are hardy for our area. We are located just north of Pasco on Columbia River Road. It's a short trip to a beautiful location to escape the hustle and bustle of your everyday life.
Here the simple steps to turning off the Saturation Skip Feature on a Rachio Irrigation Timer and why this feature can be a problem.
Read MoreOctober 2018 is here and for irrigation water, it’s the end of the season. Here are the end dates for the different irrigation districts.
Badger Mountain Irrigation District Oct 19th
Benton Irrigation District Oct 12th
City of Pasco Irrigation Water Oct 15th
Columbia Irrigation District Oct 15th
East Columbia Irrigation District Oct 22nd
Kennewick Irrigation District Oct 10th
Quincy-Columbia Basin Irrigation District Oct 24th
Roza Irrigation District Oct 18th
South Columbia Basin Irrigation District Oct 23
What we recommend doing before the water turns off is to make sure all you trees and shrubs get a good drink. Then after the irrigation water shuts off, especially for evergreens is that they get checked for moisture monthly and watered if dry. An easy way to remember is to put a reminder on your phone’s calendar.
Tuning your irrigation system allows for a more efficient use of water and it's easy. It also helps prepare your plants for different weather shifts and you apply water based on that irrigation zones conditions. Both Hunter and Rainbird have free apps to set your run times more appropriately for established yards. Also we have set up links to help determine your yards conditions. Remember that new plantings their first year will need to be babied a bit more but they don't need daily water.
A link to Hunter's App
A link to Rainbird's App
Things to know as you tune your irrigation timer
-The soil type of your yard: Sand, clay, silt or a mix of the three (loam). This will help identify how your yard behaves in drainage and moisture retnetion. Sand has very good drainage and can handle longer run times of sprinklers but needs more frequent runs. Clay soils hold moisture very well however it does not take to long run times well, short bursts work best to prevent run off and water waste. How to tell soil texture by feel.
-The exposure of that sprinkler zone. Full sun, afternoon sun or wind exposed sprinkler zones dry out faster through evaporation than afternoon shade, mostly shade and wind protected zones. Thus as you adjust your sprinkler zone times based on their separate exposures. This can be determined by taking time to walk around the house a couple of times of day and observe what area is sunny and what area is in shade at what time of day and for how long. Do this on a lazy day off.
-Your type of sprinklers. Different sprinkles types throw out water at different rates. Common sprinkler types are rotors, impacts, sprays, bubblers and multi-streamrotors. Also if you have drip, what size of emitters are your using. Irrigation System Component Video can help you identify what type of sprinklers you have.
-The grade of the yard. Is it flat or does it slope up or down? The slope of your yard also affect how sprinklers work as well as how water will travel in the yard. Here is a video to determine slope.
by Alex Job